Full Company Profile
Marketing Materials
Executive Profiles
Steve King
OwnerManager Registration
The MACK Group, LLC RSS Feed
Nationwide Mold Remediation Removal Contractor Services by The MACK Group
- ‹ previous
- 67 of 1407
- next ›
The MACK Group, LLC provides mold remediation and cleanup contracting services.
Mold Remediation Basics
-
The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
-
It is necessary to clean up mold contamination, not just to kill the mold.
-
Dead mold is still allergenic, and some dead molds are potentially toxic.
Mold Remediation Planning
The MACK Group, LLC considers the following questions when planning the remediation of mold:
- Are there existing moisture problems in the building?
- Have building materials been wet more than 48 hours?
-
Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
- Are building occupants reporting musty or moldy odors?
- Are building occupants reporting health problems?
- Are building materials or furnishings visibly damaged?
-
Has maintenance been delayed or the maintenance plan been altered?
- Has the building been recently remodeled or has building use changed?
- Is consultation with medical or health professionals indicated?
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
- Wet Vacuum
- Damp Wipe
- HEPA Vacuum
-
Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
Remediation and Cleanup Final Steps
The MACK Group, LLC makes sure the mold remediation is complete by:
- Making sure the water or moisture problem is completely fixed.
-
Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
-
Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
-
We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
-
The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.
We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
About The MACK Group, LLC
The MACK Group, LLC is an expert contractor providing a wide range of services from asbestos removal and abatement to decontamination nationwide as well as Puerto Rico. We take great pride in our impeccable safety record and our commitment to meeting our client’s project schedules and monetary budgets. Our services include asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.).
Contact Information:
The MACK Group, LLC – Corporate HQ
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK 877-759-MACK
Fax: 973-759-5554
Web: http://www.mackgrp.com
For more information contact: Steve King at 877-759-MACK or via email at sking@mackgrp.com
The MACK Group Completes Asbestos Containing Floor Tile and Mastic Removal Project
The MACK Group, LLC Completes Asbestos Floor Tile and Mastic Flooring Removal Project in Central New Jersey
The MACK Group, LLC, a premier asbestos abatement and flooring removal contractor, recently completed a project that consisted of the abatement of approximately 25,000 square feet of three (3) layers of asbestos floor tile and mastic on a concrete floor of a former super market. The project was performed for a national general contractor in order for a big box retailer to move into the space.
The MACK Group, LLC (MACK) was contracted to abate the asbestos tile and mastic that was adhered to a concrete floor without damaging the concrete. The estimated quantity of asbestos containing floor tile and mastic that needed to be abated was approximately 25,000 square feet.
To remove the asbestos tile and mastic, MACK used a combination of proprietary flooring removal machines that they own in their fleet of abatement and flooring removal equipment. These machines allowed MACK to easily remove the mastic down to the original concrete floor surface without damaging the existing concrete.
The project was completed ahead of schedule and without incident or injury in 10 days.
For more information on our flooring removal and concrete surface preparation services, please go to http://www.mackgrp.com/floor-covering-removal-contractors-services.html
About The MACK Group, LLC
The MACK Group, LLC is one of the premier contractors in the United States offering nationwide services including asbestos abatement, asbestos removal, flooring removal, shot-blasting, mold remediation, demolition, decontamination, lead abatement, duct cleaning, biological/chemical remediation and more.
Contact Information:
The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact:
Stephen King (877) 759-MACK
sking@mackgrp.com
Industrial and Commercial Licensed Asbestos Removal Services Nationwide
The MACK Group LLC provides asbestos abatement and asbestos removal services throughout the United States and Puerto Rico. We perform all our work in accordance with all environmental regulations, OSHA and Federal and State laws.
Our asbestos removal contractors services include the abatement and removal of these asbestos containing materials:
* Insulation
* Roofing
* Mastic
* Tile
* Boiler Insulation
* Caulking
* Other ACM materials
Please contact us for an estimate, proposal or bid.
About The MACK Group, LLC
The MACK Group, LLC is an expert contractor providing a wide range of services from asbestos removal and abatement to decontamination nationwide as well as Puerto Rico. We take great pride in our impeccable safety record and our commitment to meeting our client’s project schedules and monetary budgets. Our services include asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.).
Contact Information:
The MACK Group, LLC – Corporate HQ
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact: Steve King at 877-759-MACK or via email at sking@mackgrp.com
Need Decontamination Services for Industrial or Pharmaceutical Facilities?
The MACK Group, LLC provides nationwide duct work and ventilation cleaning contractor services.
Duct cleaning generally refers to the cleaning of various heating and cooling system components of forced air systems, including the supply and return air ducts and registers, grilles and diffusers, heat exchangers heating and cooling coils, condensate drain pans (drip pans) and fan motor and fan housing.
The MACK Group, LLC provides various ventilation system cleaning services for industrial, commercial, pharmaceutical, biotech and healthcare (hospitals) clients. These services include:
- Duct Work Cleaning
- Ventilation System Cleaning
- HVAC System Cleaning
- Chemical and Biological Cleaning of Ductwork and associated equipment
Please contact us for an estimate, quotation or firm bid. See our contact information below.
About The MACK Group, LLC
The Mack Group, LLC is an expert contractor providing a wide range of services from asbestos removal and abatement to decontamination nationwide. We take great pride in our impeccable safety record and our commitment to meeting our client’s project schedules and monetary budgets. Our services include asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.).
Contact Information:
The MACK Group, LLC – Corporate HQ
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: http://www.mackgrp.com
For more information contact: Steve King at 877-759-MACK or via email at sking@mackgrp.com
Manufacturing Pharmacuetical and Chemical Plant and Facility Industrial Services
The Mack Group, LLC provides a wide range of contractor services to the pharmaceutical and chemical industries. All projects are completed with OSHA safety trained personnel and our management focuses on meeting the client's schedule and staying on budget. Our services include:
- Asbestos abatement and removal
- Mold remediation and removal
- Duct work cleaning
- Biological and chemical decontamination
- Concrete floor preparation (shotblasting, scarification, etc.)
Please contact us for an estimate or firm bid or proposal.
About The MACK Group, LLC
The Mack Group, LLC is an expert specialized contractor providing a wide range of services from asbestos removal and abatement to decontamination nationwide. We take great pride in our safety record and our commitment to meeting our client’s project schedules and monetary budgets. Our services include asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.).
Contact Information:
The MACK Group, LLC – Corporate Main Office
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: http://www.mackgrp.com/
Email: Steve King sking@mackgrp.com
Large Asbestos Removal Project Completed Successfully by The Mack Group, LLC
The MACK Group, LLC, a premier asbestos abatement and removal contractor, recently completed a large project consisting of the abatement of various large quantities of asbestos containing materials (ACM). The project was completed for a large, global chemical company.
All work was performed following all OSHA & EPA regulations as they pertain to asbestos abatement. In addition, all OSHA and other safety regulations were followed as safety is paramount on all of the Mack Group’s projects.
Mobilization to the site required that several tasks be completed with attention to detail. This included the placement of all required signage on all entrances to the work area, installing connections to electric and water and the building of separation barriers and a decontamination facility. Quality Assurance inspection was performed by The MACK Groups’ competent person.
The preparation for asbestos work / Pre-asbestos demolition was conducted utilizing modified containments and the establishment of a negative air environment for dust control. Tasks during this phase included install all temporary electric w/ ground fault interrupter circuitry (GFI), installation of 2 layers of fire rated 6-mil poly on all critical barriers, installation of negative air units enough to create 4 changes per hour, removal all ceiling tile and grid from work area to allow access for cutting and capping of MEP, removal of all sheetrock not impacting any asbestos, removal of all carpeting not impacting any asbestos, removal of all bathroom fixtures, partitions, tile floors and walls, removal of all identified MEP and the installation of chutes to facilitate disposal.
There was a significant amount of ACM that needed to be properly and safely abated. Quantities included 14,200sf of transite interior walls, 9,875sf of tile and mastic, 300 lf of pipe and 198 pipe fittings. All ACM was removed using wet methods. The types of equipment utilized to efficiently remove the ACM included Micro Traps (air filtration units), HEPA Vacs, ladders, lifts, airless sprayers, respirators, air monitoring equipment, cutting tools, chutes, slides, Lull, skid steers, loaders, PPE, and an assortment of hand & power tools.
Mastic and tile were abated using chemical and Blastrac flooring removal units. Transite partitions, ducts and piping were also removed using wet methods. All ACM waste was removed from the work area through the air lock / waste chamber then directly into 6 mil poly lined dumpsters/ trailers with the proper OSHA labeling and generator labels.
Final cleanup of the work area included inspection of the work area to insure all material had been removed, a final wet wipe and HEPA vacuum of all equipment and encapsulation with a lockdown encapsulant.
The Mack Group was responsible for all OSHA sampling, recalculation of air pumps, etc. during the course of the work. Mack Group’s competent person provided oversight and managed the utilization of personal air pumps on workers and analysis by an independent third party laboratory. Results were posted onsite.
All ACM waste was disposed in an approved EPA landfill as per regulations, complete with all required documentation and manifests.
The project was completed in one month and without incident or injury.
About The MACK Group, LLC
The Mack Group, LLC is an expert contractor providing a wide range of services from asbestos removal and abatement to decontamination nationwide. We take great pride in our impeccable safety record and our commitment to meeting our client’s project schedules and monetary budgets. Our services include asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.).
Contact Information:
The MACK Group, LLC – Corporate HQ
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact: Steve King at 877-759-MACK or via email at sking@mackgrp.com
Lead Based Paint Removal Services Nationwide by The Mack Group, LLC
The MACK Group, LLC offers a total solution to your lead removal, lead abatement and lead remediation service needs. As a lead abatement removal contractor, The MACK Group, LLC offers the following services:
- Lead Paint and Dust Removal
- Lead Paint Encapsulation
- Chemical Stripping
- Lead Dust Cleanup
- Lead Paint Remediation
Typical Lead paint and Dust Removal Projects
- Removal of flaking wall paint via mechanical means (brushes, scrapers)
- Abrasive blasting removal of paint from building interiors
- Decontamination of lead dust via HEPA vacuum
- Cleanup of industrial facilities and plants with historic lead paint and lead dust contamination
- Abrasive blasting of tanks and other exterior structures
- Transportation and disposal of lead contaminated soils from paint flakes and dust
Sources of Lead Contamination
The most common sources of exposure today are soil contaminated with lead and lead-based paint that has deteriorated into paint chips and lead dust. Lead contaminated dust can come from lead-based paint that is chipping, flaking or deteriorated or when such paint is scraped, sanded, or disturbed during alteration, maintenance or demolition projects.
The MACK Group, LLC understands these sources of contamination and is an expert in the remediation of lead paint and dust. Our workers are experienced in lead based paint removal and abatement as well as trained in all OSHA regulations and safety requirements. Our management is knowledgeable in environmental regulations and how to comply with Federal and State Regulations.
If you have a lead paint or dust removal project, please contact The MACK Group, LLC to have a comprehensive estimate developed that includes both cost, schedule and methodology.
About The MACK Group, LLC
The Mack Group, LLC is an expert specialized contractor providing a wide range of services from asbestos removal and abatement to decontamination nationwide. We take great pride in our safety record and our commitment to meeting our client’s project schedules and monetary budgets. Our services include asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.).
Contact Information:
The MACK Group, LLC – Corporate Main Office
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: www.mackgrp.com
Email: Steve King sking@mackgrp.com
Mold Removal, Remediation and Cleanup Services Nationwide by The Mack Group, LLC
The MACK Group, LLC provides mold remediation and cleanup contracting services.
Mold Remediation Basics
-
The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
-
It is necessary to clean up mold contamination, not just to kill the mold.
-
Dead mold is still allergenic, and some dead molds are potentially toxic.
Mold Remediation Planning
The MACK Group, LLC considers the following questions when planning the remediation of mold:
- Are there existing moisture problems in the building?
- Have building materials been wet more than 48 hours?
-
Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
- Are building occupants reporting musty or moldy odors?
- Are building occupants reporting health problems?
- Are building materials or furnishings visibly damaged?
-
Has maintenance been delayed or the maintenance plan been altered?
- Has the building been recently remodeled or has building use changed?
- Is consultation with medical or health professionals indicated?
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
- Wet Vacuum
- Damp Wipe
- HEPA Vacuum
-
Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
Remediation and Cleanup Final Steps
The MACK Group, LLC makes sure the mold remediation is complete by:
- Making sure the water or moisture problem is completely fixed.
-
Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
-
Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
-
We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
-
The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.
Nationwide Mold Remediation Removal Contractor Services
We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
Contact Information:
The MACK Group, LLC – Corporate Main Office
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: www.mackgrp.com
Email: Steve King sking@mackgrp.com
How much does mold removal and remediation cost?
A typical question from clients is "How much does mold remediation, removal and cleanup cost?"
There is no set unit pricing for mold remediation, removal and cleanup. There are many factors that affect removal costs including materials that are mold infected (wood, plaster, flooring, etc.), geographic location, location of the mold (is it throughout the structure?, is it in the duct work?, is it behind the walls?), disposal and transportation costs.
The Mack Group, LLC has the expertise and experience to develop cost estimates for a simple mold removal abatement project to an entire facility wide mold removal project. We can provide a cost estimate as well as firm pricing and, of course, we can professionally and safely execute the actual mold abatement. We look forward to providing you consulting, estimating or contracting services on your next mold removal project.
Contact Information:
The MACK Group, LLC - Corp. Main Office
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact: Steve King (877) 759-MACK or via email sking@mackgrp.com
The Mack Group, LLC Reports Impressive Safety Record for 2008
The MACK Group, LLC is Pleased to Announce 2008 to be a Year of Non-Recordable Incidents and Continued EMR of Below 1.0.
The MACK Group is proud to announce that the 2008 year was a year of non-recordable OSHA incidents. Due to this impressive safety record, The Mack Group has been able to maintain an EMR rating of below 1.0. This safety record was accomplished through the dedication to safety and teamwork of our employees, subcontractors and clients.
During 2008, The MACK Group performed all work without an OSHA recordable incident / accident. This work was performed on asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.) projects. Each project was overseen by a site safety officer and staffed by a site supervisor who enforced The MACK Group’s corporate Health and Safety Plan as well as client specific safety standards and, of course, all OSHA, EPA and ANSI standards.
The MACK Group prioritizes safety on each and every project as well as throughout the organization. Everyone, from the owner’s of the company to the laborers as well as any subcontractors, is actively involved in The MACK Group’s commitment to an incident-free workplace.
This safety record has been made possible through The MACK Group’s commitment to educating and training employees (40 Hour Haz WOPWER, 10 & 30 OSHA Construction Training, etc.), providing the latest technology in tools and equipment and our employees dedication to implementing proper safety procedures and immediately correcting any potential hazards. The MACK Group is dedicated to continuing this exceptional safety record through 2009 and beyond.
About The Mack Group, LLC
The Mack Group, LLC is an expert, licensed contractor providing a wide range of services from asbestos removal and abatement to decontamination. We operate throughout the United States and Puerto Rico. We take great pride in our safety record and our commitment to meeting our client’s project schedules and monetary budgets. Our services include asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.).
Contact Information:
The MACK Group, LLC - Corp. HQ
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact: Steve King at sking@mackgrp.com
Company Snapshot
The MACK Group, LLC
Year Founded: 2000
Employees: 35
1500 Kings Hwy N
Suite 209, Cherry Hill, NJ 08034
P. (973) 759 - 5000
http://www.mackgrp.com
